64 instruments Orthodontics

Distal-End Cutter TC

A tungsten-carbide-tipped orthodontic plier that trims excess archwire behind the last molar tube. 14 cm, black coated.

MOQ 200 instruments

Wire Cutter TC

A tungsten-carbide-tipped orthodontic plier for cutting hard archwire and heavy appliance wire, chairside or on the bench. 13 cm, black coated with a bright carbide edge.

MOQ 200 instruments

Orthodontic Tear Drop Plier

A tear drop plier is an orthodontic hand instrument used with thermoformed clear aligners or retainers, whose beak presses or cuts a small, clean teardrop or half moon shaped notch into the edge of the appliance at the gum line.

MOQ 200 instruments

Aligner Plier Set

A pliers set is a boxed assortment of two or more plier patterns, each with its own jaw shape, packaged and sold together rather than as one instrument.

MOQ 200 instruments

Orthodontic Horizontal Plier

Horizontal Pliers are a hand-held dental instrument used in orthodontic and clear-aligner work to form a shaped bump or indentation into a thermoformed plastic aligner or retainer shell.

MOQ 200 instruments

Orthodontic Hole Punch Plier

Punch pliers are a plier-type hand instrument built to cut a clean, round hole through a thin sheet, most often a rubber dam sheet used in dental isolation work.

MOQ 200 instruments

TGI's own catalog photograph of this article.

Hard Wire Cutter TC

A wire cutter is a hand instrument built to shear wire to length between two hardened jaw edges.

MOQ 200 instruments

Dimple Dot Plier

A dimple plier is a hand plier from the orthodontic clear-aligner range.

MOQ 200 instruments

Orthodontic Setup

An orthodontic kit is a set of separate orthodontic hand instruments packaged together in a tray, pouch or cassette, so the trade name covers the packaging rather than one fixed article.

MOQ 200 instruments

Orthodontic Instruments /Pliers/Forceps/Scaler - Set Of 15

An orthodontic kit is a set of separate orthodontic hand instruments packaged together in a tray, pouch or cassette, so the trade name covers the packaging rather than one fixed article.

MOQ 200 instruments

Ivory Punch

Punch pliers are a plier-type hand instrument built to cut a clean, round hole through a thin sheet, most often a rubber dam sheet used in dental isolation work.

MOQ 200 instruments

Hole Punch

Punch pliers are a plier-type hand instrument built to cut a clean, round hole through a thin sheet, most often a rubber dam sheet used in dental isolation work.

MOQ 200 instruments

Bracket Movable Gauge

A bracket height gauge is an orthodontic hand instrument used to set an orthodontic bracket at a chosen height on the tooth, measured from the incisal edge or cusp tip, before the bracket is bonded.

MOQ 200 instruments

Band Seater (Tin Insert)

A band seater is a dental hand instrument for pressing a preformed orthodontic band into place on a molar or premolar before it is cemented.

MOQ 200 instruments

Band Seating Scaler

A band seater is a dental hand instrument for pressing a preformed orthodontic band into place on a molar or premolar before it is cemented.

MOQ 200 instruments

TGI's own catalog photograph of this article.

Ligature Tucker

A single orthodontic hand instrument used to press and seat the cut end of a ligature wire or elastic tie flat against a bracket wing, so no free wire end is left to catch the cheek or tongue.

MOQ 200 instruments

Ligature Twirl-on Applicator

An elastomeric ligature applicator is an orthodontic chairside hand instrument for placing an elastomeric ligature (the small rubber module that holds the archwire in the bracket slot) onto a bracket.

MOQ 200 instruments

Band Seater (Double Ended)

A band seater is a dental hand instrument for pressing a preformed orthodontic band into place on a molar or premolar before it is cemented.

MOQ 200 instruments

Band Pusher (Double Ended)

A band seater is a dental hand instrument for pressing a preformed orthodontic band into place on a molar or premolar before it is cemented.

MOQ 200 instruments

TGI's own catalog photograph of this article.

Ligature Tucker

A single orthodontic hand instrument used to press and seat the cut end of a ligature wire or elastic tie flat against a bracket wing, so no free wire end is left to catch the cheek or tongue.

MOQ 200 instruments

Ligature Twirl-on Applicator (Single End)

An elastomeric ligature applicator is an orthodontic chairside hand instrument for placing an elastomeric ligature (the small rubber module that holds the archwire in the bracket slot) onto a bracket.

MOQ 200 instruments

Grooving Thermal Forming Plier

Thermoforming pliers are a family of pliers used in the dental-lab and chairside step of making or adjusting a clear aligner, retainer or bite-plane appliance from a vacuum- or pressure-formed plastic sheet.

MOQ 200 instruments

Bubble Thermal Forming Plier

Thermoforming pliers are a family of pliers used in the dental-lab and chairside step of making or adjusting a clear aligner, retainer or bite-plane appliance from a vacuum- or pressure-formed plastic sheet.

MOQ 200 instruments

Micro Ramp Plier

Orthodontic pliers are a family of small hand pliers, each pattern built for one step of placing or adjusting fixed-brace hardware, and the jaw, not the handle, is what tells one pattern from the next.

MOQ 200 instruments

Circular Forming Plier

Thermoforming pliers are a family of pliers used in the dental-lab and chairside step of making or adjusting a clear aligner, retainer or bite-plane appliance from a vacuum- or pressure-formed plastic sheet.

MOQ 200 instruments

Horizontal Plier

Horizontal Pliers are a hand-held dental instrument used in orthodontic and clear-aligner work to form a shaped bump or indentation into a thermoformed plastic aligner or retainer shell.

MOQ 200 instruments

Hole Punch Plier

Punch pliers are a plier-type hand instrument built to cut a clean, round hole through a thin sheet, most often a rubber dam sheet used in dental isolation work.

MOQ 200 instruments

Vertical Plier

Orthodontic pliers are a family of small hand pliers, each pattern built for one step of placing or adjusting fixed-brace hardware, and the jaw, not the handle, is what tells one pattern from the next.

MOQ 200 instruments

Tear Drop Plier

A tear drop plier is an orthodontic hand instrument used with thermoformed clear aligners or retainers, whose beak presses or cuts a small, clean teardrop or half moon shaped notch into the edge of the appliance at the gum line.

MOQ 200 instruments

TGI's own catalog photograph of this article.

Hollow Chop Plier

A hollow chop plier is an orthodontic wire bending hand plier with a concave, hollow ground beak on one side and a matching convex or stepped beak on the other, so a length of round section archwire is contoured or bent between the two without being flattened, kinked, or marked.

MOQ 200 instruments

TGI's own catalog photograph of this article.

V-Bend Notch Plier

Orthodontic pliers are a family of small hand pliers, each pattern built for one step of placing or adjusting fixed-brace hardware, and the jaw, not the handle, is what tells one pattern from the next.

MOQ 200 instruments

Dela Rosa Plier

Orthodontic pliers are a family of small hand pliers, each pattern built for one step of placing or adjusting fixed-brace hardware, and the jaw, not the handle, is what tells one pattern from the next.

MOQ 200 instruments

V-Stop Plier

Orthodontic pliers are a family of small hand pliers, each pattern built for one step of placing or adjusting fixed-brace hardware, and the jaw, not the handle, is what tells one pattern from the next.

MOQ 200 instruments

TGI's own catalog photograph of this article.

Hollow Chop Plier

A hollow chop plier is an orthodontic wire bending hand plier with a concave, hollow ground beak on one side and a matching convex or stepped beak on the other, so a length of round section archwire is contoured or bent between the two without being flattened, kinked, or marked.

MOQ 200 instruments

TGI's own catalog photograph of this article.

V-Bend Notch Plier

Orthodontic pliers are a family of small hand pliers, each pattern built for one step of placing or adjusting fixed-brace hardware, and the jaw, not the handle, is what tells one pattern from the next.

MOQ 200 instruments

Torque Female Plier

The female, or outer, half of a two-piece orthodontic torquing pliers pair used to place a controlled twist (torque) into a square, rectangular or round archwire for single-tooth root movement.

MOQ 200 instruments

Torque Male Plier

Torquing pliers are a hand plier pattern for adding torque to a rectangular section orthodontic archwire, so the wire is twisted along its own long axis rather than bent sideways.

MOQ 200 instruments

Z-Bend Plier

Orthodontic pliers are a family of small hand pliers, each pattern built for one step of placing or adjusting fixed-brace hardware, and the jaw, not the handle, is what tells one pattern from the next.

MOQ 200 instruments

Step Plier Silicone Handle Yellow

Step pliers are hinged, plain-jawed orthodontic pliers used to put a small right-angle step, rather than a curve, into round or rectangular wire.

MOQ 200 instruments

Step Plier Silicone Handle Red

Step pliers are hinged, plain-jawed orthodontic pliers used to put a small right-angle step, rather than a curve, into round or rectangular wire.

MOQ 200 instruments

Step Plier Silicone Handle Green

Step pliers are hinged, plain-jawed orthodontic pliers used to put a small right-angle step, rather than a curve, into round or rectangular wire.

MOQ 200 instruments

Reynolds Contouring Plier

Contouring pliers are a hand pliers used on crowns, bands and removable partial appliances to bend and shape metal by controlled pressure rather than by cutting it.

MOQ 200 instruments

Crown Crimping Plier

Crimping pliers used in restorative and pediatric dentistry to crimp the cervical (gingival) margin of a preformed aluminum or stainless steel crown so it seats snugly against the prepared tooth.

MOQ 200 instruments

Bracket Remover PlierTitanium

A bracket remover plier, also cataloged as a debonding plier, is an orthodontic hand plier built on a lap joint rather than a box joint, so the two halves lie flat one against the other.

MOQ 200 instruments

Bracket Remover Plier Titanium Blue

A bracket remover plier, also cataloged as a debonding plier, is an orthodontic hand plier built on a lap joint rather than a box joint, so the two halves lie flat one against the other.

MOQ 200 instruments

Bracket Remover Plie TC Straight

A bracket remover plier, also cataloged as a debonding plier, is an orthodontic hand plier built on a lap joint rather than a box joint, so the two halves lie flat one against the other.

MOQ 200 instruments

Torquing Plier

Torquing pliers are a hand plier pattern for adding torque to a rectangular section orthodontic archwire, so the wire is twisted along its own long axis rather than bent sideways.

MOQ 200 instruments

Band Remover Plier

A bracket remover plier, also cataloged as a debonding plier, is an orthodontic hand plier built on a lap joint rather than a box joint, so the two halves lie flat one against the other.

MOQ 200 instruments

Bracket Remover Plier TC Curved

A bracket remover plier, also cataloged as a debonding plier, is an orthodontic hand plier built on a lap joint rather than a box joint, so the two halves lie flat one against the other.

MOQ 200 instruments

Nance Clasp Plier

Orthodontic pliers are a family of small hand pliers, each pattern built for one step of placing or adjusting fixed-brace hardware, and the jaw, not the handle, is what tells one pattern from the next.

MOQ 200 instruments

Tweed Loop Plier

An orthodontic wire-bending plier used to form closed loops in rectangular or round archwire, for example vertical loops, T-loops or similar space-closing and activation loops.

MOQ 200 instruments

Young Plier

Orthodontic pliers are a family of small hand pliers, each pattern built for one step of placing or adjusting fixed-brace hardware, and the jaw, not the handle, is what tells one pattern from the next.

MOQ 200 instruments

Weingart Slim Plier

Orthodontic pliers are a family of small hand pliers, each pattern built for one step of placing or adjusting fixed-brace hardware, and the jaw, not the handle, is what tells one pattern from the next.

MOQ 200 instruments

Universal Wire Cutter

A wire cutter is a hand instrument built to shear wire to length between two hardened jaw edges.

MOQ 200 instruments

Distal End Plier

A distal end cutter is an orthodontic wire cutter: two handles on a riveted joint carrying a compact angled head with two hard cutting inserts, normally tungsten carbide brazed into a stainless body.

MOQ 200 instruments

Bird Beak Plier

A wire-forming plier from the orthodontic group, named for its two unlike beaks: one round or conical, the other pyramidal and tapering.

MOQ 200 instruments

TGI's own catalog photograph of this article.

Adam Plier TC

Orthodontic pliers are a family of small hand pliers, each pattern built for one step of placing or adjusting fixed-brace hardware, and the jaw, not the handle, is what tells one pattern from the next.

MOQ 200 instruments

TGI's own catalog photograph of this article.

Adam Plier TC

Orthodontic pliers are a family of small hand pliers, each pattern built for one step of placing or adjusting fixed-brace hardware, and the jaw, not the handle, is what tells one pattern from the next.

MOQ 200 instruments

TGI's own catalog photograph of this article.

Weingart Plier TC

Orthodontic pliers are a family of small hand pliers, each pattern built for one step of placing or adjusting fixed-brace hardware, and the jaw, not the handle, is what tells one pattern from the next.

MOQ 200 instruments

TGI's own catalog photograph of this article.

Hard Wire Cutter TC

A wire cutter is a hand instrument built to shear wire to length between two hardened jaw edges.

MOQ 200 instruments

Nance Loop Plier TC

An orthodontic wire-bending plier used to form closed loops in rectangular or round archwire, for example vertical loops, T-loops or similar space-closing and activation loops.

MOQ 200 instruments

Tweed Arch Plier TC

An arch bending pliers is an orthodontic hand plier used to put bends into an archwire during wire adjustment.

MOQ 200 instruments

How Plier TC

A general-purpose hand plier used on the dental laboratory bench and chairside to grasp, bend, shape and hold wire, clasps and archwires while a denture or wire appliance is being made or adjusted.

MOQ 200 instruments

TGI's own catalog photograph of this article.

Weingart Plier TC

Orthodontic pliers are a family of small hand pliers, each pattern built for one step of placing or adjusting fixed-brace hardware, and the jaw, not the handle, is what tells one pattern from the next.

MOQ 200 instruments