Dental instruments
Bird Beak Plier
TGI referenceTG-REF:786Quote this to us. It is printed on TGI's own catalog photograph of this article.TGI-C-42C00631 Web reference. It identifies this page, not a factory part number.
Sizes TGI publishes(13cm) Printed on TGI's own catalogue photograph of this article.
Also printed on the photographTC Printed on TGI's own catalogue photograph of this article.
Also called Light Wire Plier
One round beak bends a curve or loop into the wire; the pyramidal beak sets a sharp angle.
A wire-forming plier from the orthodontic group, named for its two unlike beaks: one round or conical, the other pyramidal and tapering. Wire is bent around the round beak while the pyramidal beak holds it, which is how loops of a set radius are formed. It has two plain handles and a joint, with no lock, no ratchet and no spring. It is cataloged by the wire diameter it takes rather than by its own length, and it is distinguished from a wire cutter by having no cutting edge on either beak.
Minimum order200 instrumentsThe minimum for dental instruments. Mixed orders are quoted against your list.
Lead timeInstruments ~2-3 weeks · full sets ~4-6 weeks after advance.
Quality control
The inspection step is set by the line you order.
- Economy line
- sample: visual + dimensional
- Clinical line
- sample + boil test
- Premium line
- tighter sample + hardness test
- Executive line
- 100% inspection + laser mark
Finish A color is a second choice, made on top of the line. Colored finishes on request, on any instrument, in addition to the steel line. Evidenced: black · gold · rose gold · blue · rainbow (anodised titanium).
How it is built
- Two unlike beaks: one round or conical, one pyramidal, tapering to the tip
- No cutting edge on either beak; it forms wire, it does not cut it
- Beak faces are smoothed so the wire surface is not scored
- Two plain handles with a joint; lap joint on the pattern read, no lock and no spring
- Stainless steel; one supplier names 440A German stainless steel
- Tungsten carbide insert versions are made alongside plain steel versions
- Cataloged by wire diameter capacity, and by pattern number in the orthodontic trade
Patterns139 · 140 · 141 · 139 long tip · 678-304
The standard sizes this kind of instrument is made in
Round wire up to.030 in (0.76 mm) · Wire up to.028 in (0.71 mm)
These are the sizes the pattern is manufactured in across the trade. They are not a stock list. Tell us the size you need and we will quote against it.
This describes the article. The steel, the finish and the inspection step are set by the line you order.
Material and quality
| Line | Steel | Origin | Finish | Inspection |
|---|---|---|---|---|
| Economy line | AISI 410 | Pakistani or Taiwanese | satin, passivated | sample: visual + dimensional |
| Clinical line | AISI 420 | Pakistani or German | satin, passivated | sample + boil test |
| Premium line | AISI 420-440C | German or Japanese | fine polish, passivated | tighter sample + hardness test |
| Executive line | AISI 440C | German or Japanese | mirror polish, passivated | 100% inspection + laser mark |
This is the steel each line is made from as standard. A different origin can be supplied on request (a lower grade in Japanese steel, for example), agreed on your order.
Premium is the line where the choice is yours: 420 or 440C, agreed on your order. Economy is always 410 and Executive is always 440C. Those three are the instrument steels. Hollowware and sterilization containers are made in AISI 202 on a Clinical order and AISI 304 on a Premium or Executive one, and they are not offered in the Economy line at all, which is the section above.
True of every order
Instruments are marked to the buyer's requirement (TGI, unmarked, or the buyer's own brand), agreed on the order.
Customized packaging is part of what TGI supplies. Your own printed boxes, your labels, your brand on the pack, or plain export packing, whichever your market needs. The packing for your order is agreed with you and confirmed on the order.
Manufactured under the quality management system covered by TGI's ISO 9001:2015 and ISO 13485:2016 certificates. Certificate numbers and the issuer's registry are on the certification page. Open the certificates
Every batch of steel is ordered to a specified grade and arrives with the mill's own certificate, which identifies the mill and states the grade. TGI checks the material at the factory against its own requirement before it goes into production. That check is TGI's own inspection, not an independent laboratory test.
TGI manufactures in its own factory in Sialkot and also supplies articles made by contracted partner workshops, to TGI's specification. Which applies to a given article is confirmed on your order.
One-year guarantee on Premium and Executive tier instruments, hollowware and sterilization containers: any technical manufacturing defect, including material faults and rust, is replaced free of charge. Damage from handling or accidents is not covered. The year runs from the day the goods leave Sialkot.
If something is wrong with a delivery (a manufacturing defect, or a short or wrong article), tell us on WhatsApp within 7 days of delivery, with a video and photographs of what arrived. Replacement instruments are sent free of charge and dispatched within 24 hours of us seeing them; you pay the shipping, and they reach you as a normal order does.
Damage that happened after the goods left Sialkot is a claim against your carrier. The video of your parcel at the shipping office is sent to you before shipment and is the evidence that claim needs.
