Hollowware and sterilization boxes
Mesh Tray
Also called mesh tray · sterilizing basket · DIN basket
A rectangular stainless-steel wire-mesh basket with fold-down handles, used to hold instruments through cleaning, sterilization and storage, sized to the DIN 1/2 basket footprint.
What it is
A rectangular stainless-steel wire-mesh sterilization basket, also called a mesh tray, sterilizing basket or DIN basket. It holds surgical and dental instruments through cleaning, disinfection, sterilization and storage. Woven square mesh forms the base and all four side walls. It has a solid reinforced round-wire rim, rounded corners, a bright reflective finish, and two hinged fold-down wire handles, one on each long side, which rest flat against the inner walls. It is an open basket. A lid is optional and is agreed on your order.
Central sterile supply / CSSD technicians, theatre and scrub staff, dental practice sterilization-room staff, veterinary and laboratory instrument-processing staff.
Full specification
- Category
- Hollowware and sterilization boxes
- Size
- 240 x 250 x 60 mm (1/2 DIN footprint)
- Steel lines
- Clinical: AISI 202 · Premium and Executive: AISI 304
- Minimum order
- 200 pcs
- Mixing sizes
- Whether one minimum may be spread across sizes and patterns is agreed per order.
- Lead time
- Instruments ~2-3 weeks · full sets ~4-6 weeks after advance.
- Supplied
- Non-sterile
- Also known as
- mesh tray · sterilizing basket · DIN basket
What it does
- Holds and organizes surgical, dental and general instruments as one tray-load through the whole cycle: ultrasonic cleaning, washer-disinfector, rinsing and drying, steam sterilization, storage, and transport to the point of use.
- The open mesh on base and sides lets water, detergent, rinse water and steam reach every instrument surface, and lets condensate and air drain out.
- Used as the inner instrument carrier inside rigid sterilization containers, or inside a wrapped sterile barrier system.
- Keeps a set together so it can be counted, checked and issued as one unit.
- Standard sizing lets trays fit the inside of standard sterilizers and sterilization containers without wasting chamber space.
Supplied as
Steel & finish: you choose the line
How the lines differOne-year guarantee on Premium and Executive tier instruments, hollowware and sterilization containers: any technical manufacturing defect, including material faults and rust, is replaced free of charge. Damage from handling or accidents is not covered.
Also made as
Other versions of this instrument in the catalog, each at its own address with its photograph.
More in Hollowware and sterilization boxes
Material and quality
| Line | Steel | Origin | Finish | Inspection |
|---|---|---|---|---|
| Clinical | AISI 202 | Pakistani or Taiwanese | Bright / mirror polish | Every piece inspected: finish and hand-finishing, polish, edges, size, shine and overall structure, and the buyer's own design or logo where one is specified. Anything that does not meet the specification is corrected rather than passed. |
| Premium and Executive | AISI 304 | German or Japanese | Bright / mirror polish | Every piece inspected: finish and hand-finishing, polish, edges, size, shine and overall structure, and the buyer's own design or logo where one is specified. Anything that does not meet the specification is corrected rather than passed. |
This is the steel each line is made from as standard. A different origin can be supplied on request (a lower grade in Japanese steel, for example), agreed on your order.
Both grades are stainless steel, and the line you order is what sets which one you get: AISI 202 on a Clinical order, AISI 304 on a Premium or Executive one. Hollowware starts at Clinical: there is no Economy line in these two grades. AISI 304 resists corrosion better. Neither is hardened by heat treatment, so neither is harder than the instrument grades.
Premium is the line where the choice is yours: 420 or 440C, agreed on your order. Economy is always 410 and Executive is always 440C. Those three are the instrument steels. Hollowware and sterilization containers are made in AISI 202 on a Clinical order and AISI 304 on a Premium or Executive one, and they are not offered in the Economy line at all, which is the section above.
True of every order
Instruments are marked to the buyer's requirement (TGI, unmarked, or the buyer's own brand), agreed on the order.
Customized packaging is part of what TGI supplies. Your own printed boxes, your labels, your brand on the pack, or plain export packing, whichever your market needs. The packing for your order is agreed with you and confirmed on the order.
Manufactured under the quality management system covered by TGI's ISO 9001:2015 and ISO 13485:2016 certificates. Certificate numbers and the issuer's registry are on the certification page. Open the certificates
Every batch of steel is ordered to a specified grade and arrives with the mill's own certificate, which identifies the mill and states the grade. TGI checks the material at the factory against its own requirement before it goes into production. That check is TGI's own inspection, not an independent laboratory test.
TGI manufactures in its own factory in Sialkot and also supplies articles made by contracted partner workshops, to TGI's specification. Which applies to a given article is confirmed on your order.
One-year guarantee on Premium and Executive tier instruments, hollowware and sterilization containers: any technical manufacturing defect, including material faults and rust, is replaced free of charge. Damage from handling or accidents is not covered. The year runs from the day the goods leave Sialkot.
If something is wrong with a delivery (a manufacturing defect, or a short or wrong article), tell us on WhatsApp within 7 days of delivery, with a video and photographs of what arrived. Replacement instruments are sent free of charge and dispatched within 24 hours of us seeing them; you pay the shipping, and they reach you as a normal order does.
Damage that happened after the goods left Sialkot is a claim against your carrier. The video of your parcel at the shipping office is sent to you before shipment and is the evidence that claim needs.
Next step
Ask for a quote on Mesh Tray.
Tell us the tier and the quantity, and we answer with a written offer. Free samples for all buyers: you pay only the sample shipping cost. Samples dispatched within 48 hours.
- Payment
- Payment by TT bank transfer. Structures: 50/50, 70/30, or 100% advance, agreed per order. Balance always before shipment, released against video proof of your finished parcel at the shipping office.
- Freight
- Base price FCA Sialkot: TGI hands the goods and the export documents to your carrier or your own agent at the factory, and your tracking starts there. For a sea container the basis is FOB Karachi. The buyer pays freight: ship on your own carrier account or your own forwarder, or have delivery arranged through TGI's logistics partner and quoted per destination.