Surgical instruments
Dissecting Forceps
A spring-action, non-ratcheted thumb forceps that grasps and steadies tissue while the other hand cuts or sutures. Supplied in the toothed 1x2 pattern, in three lengths.
What it is
A spring, non-ratcheted, two-armed instrument: two blades joined at one end, closed by squeezing between thumb and finger, and reopened by the spring of the metal itself. It has no box joint, no ratchet and no ring handles. It is held in a pencil grip, usually in the non-dominant hand. Names are used interchangeably by region: dissecting forceps in the UK, thumb forceps in the US, tissue forceps when the tips are toothed, dressing forceps when they are not. Supplied in the toothed 1x2 pattern, in three straight lengths.
Full specification
- Category
- Surgical instruments
- Sizes and patterns
- 6" (approx. 152 mm) · 8" (approx. 203 mm) · 10" (approx. 254 mm)
- Steel lines
- Economy line: AISI 410 · Clinical line: AISI 420 · Premium line: AISI 420-440C · Executive line: AISI 440C
- Minimum order
- 300 instruments
- Mixing sizes
- Whether one minimum may be spread across sizes and patterns is agreed per order.
- Lead time
- Instruments ~2-3 weeks · full sets ~4-6 weeks after advance.
- Supplied
- Non-sterile
What it does
- Grips, steadies and holds back tissue, leaving the operating hand free to cut, suture, tie or seal.
- Held in a pencil grip in the non-dominant hand during suturing, to steady or reposition tissue.
- Handles needles, swabs, packs and other instruments during an operation.
- Toothed 1x2 jaws hold tough or slippery tissue such as skin, fascia, fat and tendon, with less crushing than a smooth jaw squeezed hard.
- Used in general and abdominal surgery, wound closure, minor surgery and emergency care, plastic and reconstructive work, dentistry, veterinary surgery and anatomy teaching.
Supplied as
Steel & finish: you choose the line
How the four tiers differOne-year guarantee on Premium and Executive tier instruments, hollowware and sterilization containers: any technical manufacturing defect, including material faults and rust, is replaced free of charge. Damage from handling or accidents is not covered.
Also made as
Other versions of this instrument in the catalog, each at its own address with its photograph.
Material and quality
| Line | Steel | Origin | Finish | Inspection |
|---|---|---|---|---|
| Economy line | AISI 410 | Pakistani or Taiwanese | satin, passivated | sample: visual + dimensional |
| Clinical line | AISI 420 | Pakistani or German | satin, passivated | sample + boil test |
| Premium line | AISI 420-440C | German or Japanese | fine polish, passivated | tighter sample + hardness test |
| Executive line | AISI 440C | German or Japanese | mirror polish, passivated | 100% inspection + laser mark |
This is the steel each line is made from as standard. A different origin can be supplied on request (a lower grade in Japanese steel, for example), agreed on your order.
Premium is the line where the choice is yours: 420 or 440C, agreed on your order. Economy is always 410 and Executive is always 440C. Those three are the instrument steels. Hollowware and sterilization containers are made in AISI 202 on a Clinical order and AISI 304 on a Premium or Executive one, and they are not offered in the Economy line at all, which is the section above.
True of every order
Instruments are marked to the buyer's requirement (TGI, unmarked, or the buyer's own brand), agreed on the order.
Customized packaging is part of what TGI supplies. Your own printed boxes, your labels, your brand on the pack, or plain export packing, whichever your market needs. The packing for your order is agreed with you and confirmed on the order.
Manufactured under the quality management system covered by TGI's ISO 9001:2015 and ISO 13485:2016 certificates. Certificate numbers and the issuer's registry are on the certification page. Open the certificates
Every batch of steel is ordered to a specified grade and arrives with the mill's own certificate, which identifies the mill and states the grade. TGI checks the material at the factory against its own requirement before it goes into production. That check is TGI's own inspection, not an independent laboratory test.
TGI manufactures in its own factory in Sialkot and also supplies articles made by contracted partner workshops, to TGI's specification. Which applies to a given article is confirmed on your order.
One-year guarantee on Premium and Executive tier instruments, hollowware and sterilization containers: any technical manufacturing defect, including material faults and rust, is replaced free of charge. Damage from handling or accidents is not covered. The year runs from the day the goods leave Sialkot.
If something is wrong with a delivery (a manufacturing defect, or a short or wrong article), tell us on WhatsApp within 7 days of delivery, with a video and photographs of what arrived. Replacement instruments are sent free of charge and dispatched within 24 hours of us seeing them; you pay the shipping, and they reach you as a normal order does.
Damage that happened after the goods left Sialkot is a claim against your carrier. The video of your parcel at the shipping office is sent to you before shipment and is the evidence that claim needs.
Next step
Ask for a quote on Dissecting Forceps.
Tell us the tier and the quantity, and we answer with a written offer. Free samples for all buyers: you pay only the sample shipping cost. Samples dispatched within 48 hours.
- Payment
- Payment by TT bank transfer. Structures: 50/50, 70/30, or 100% advance, agreed per order. Balance always before shipment, released against video proof of your finished parcel at the shipping office.
- Freight
- Base price FCA Sialkot: TGI hands the goods and the export documents to your carrier or your own agent at the factory, and your tracking starts there. For a sea container the basis is FOB Karachi. The buyer pays freight: ship on your own carrier account or your own forwarder, or have delivery arranged through TGI's logistics partner and quoted per destination.