Surgical instruments
Brackman Suction Tube
Web referenceTGI-C-82091E8DQuote this to us. It identifies this page, not a factory part number.
Sizes TGI publishes5 1/2" (left variant) · working length 95mm (left variant) · 6 1/8" (right variant) · working length 105mm (right variant) Printed on TGI's own catalogue photograph of this article.
Also printed on the photographleft variant: 2.5 x 4.0 French, 4.0 x 5.0 French, angled, thumb plate with cutoff · right variant: 4x5 French angled, 5x7 French angled, 7 French angled, offset holes, thumb plate with cuttoff hole Printed on TGI's own catalogue photograph of this article.
Also available inSize5 1/2'' 2.5 x 4.0 French, 4.0 x 5.0 French angled, working length 95mm, thumb plate with cutoff · 6 1/8'' 4x5 French angled 5x7 French angled 7 French angled working length 105mm offset holes thumb plate with cuttoff hole The tip size options printed on TGI's own catalogue photograph beside this article. They are ordered separately: name the one you need when you ask for a quote. They are not the dimensions of the instrument pictured.
Also called brackmann suction tube · Suction Cannula · Suction Tip
A tapered, curved tip bent at about 135 degrees, sized for the neurotologic and skull-base work where the shaft must clear delicate structures at that specific angle.
A suction tube is a rigid, single-piece stainless-steel cannula that connects by flexible tubing to a suction source and is held to draw fluid and debris out of an operative field. One end is a plain connector sized for standard suction tubing; the working tip at the other end is what identifies the pattern. The Yankauer pattern ends in a bulbous, multi-holed head on an angled shaft. The Frazier pattern is a fine, straight tube with a small vent hole on the shaft that can be covered or uncovered to vary suction strength. The Poole pattern carries a second, removable outer perforated sleeve fitted over an inner tube, so coarse material is screened out through the wide sleeve, with finer suction available once the sleeve is lifted off.
Minimum order300 instrumentsThe minimum for surgical instruments. Mixed orders are quoted against your list.
Lead timeInstruments ~2-3 weeks · full sets ~4-6 weeks after advance.
Quality control
The inspection step is set by the line you order.
- Economy line
- sample: visual + dimensional
- Clinical line
- sample + boil test
- Premium line
- tighter sample + hardness test
- Executive line
- 100% inspection + laser mark
Finish A color is a second choice, made on top of the line. Colored finishes on request, on any instrument, in addition to the steel line. Evidenced: black · gold · rose gold · blue · rainbow (anodised titanium).
How it is built
- Single-piece rigid stainless-steel tube, no joint, hinge or blade
- Proximal end: plain connector for flexible suction tubing
- Yankauer tip: bulbous head with multiple side holes, on an angled shaft
- Frazier tip: fine straight tube with a vent hole on the shaft that can be covered or uncovered
- Poole tip: removable outer perforated sleeve fitted over an inner suction tube
- Made in different French-gauge sizes and shaft lengths within each pattern
PatternsYankauer · Frazier · Poole
The standard sizes this kind of instrument is made in
2.7 mm (8 Fr), Frazier pattern · 3.3 mm (10 Fr), Frazier pattern · 4.0 mm (12 Fr), Frazier pattern · 4.7 mm (14 Fr), Frazier pattern · 6.0 mm (18 Fr), Yankauer pattern · 6.7 mm (20 Fr), Yankauer pattern, standard adult size · 7.3 mm (22 Fr), Yankauer pattern
These are the sizes the pattern is manufactured in across the trade. They are not a stock list. Tell us the size you need and we will quote against it.
This describes the suction tube as an article. 64 other articles in this catalog share it: the sentence above is what separates this one. This describes the article. The steel, the finish and the inspection step are set by the line you order.
Material and quality
| Line | Steel | Origin | Finish | Inspection |
|---|---|---|---|---|
| Economy line | AISI 410 | Pakistani or Taiwanese | satin, passivated | sample: visual + dimensional |
| Clinical line | AISI 420 | Pakistani or German | satin, passivated | sample + boil test |
| Premium line | AISI 420-440C | German or Japanese | fine polish, passivated | tighter sample + hardness test |
| Executive line | AISI 440C | German or Japanese | mirror polish, passivated | 100% inspection + laser mark |
This is the steel each line is made from as standard. A different origin can be supplied on request (a lower grade in Japanese steel, for example), agreed on your order.
Premium is the line where the choice is yours: 420 or 440C, agreed on your order. Economy is always 410 and Executive is always 440C. Those three are the instrument steels. Hollowware and sterilization containers are made in AISI 202 on a Clinical order and AISI 304 on a Premium or Executive one, and they are not offered in the Economy line at all, which is the section above.
True of every order
Instruments are marked to the buyer's requirement (TGI, unmarked, or the buyer's own brand), agreed on the order.
Customized packaging is part of what TGI supplies. Your own printed boxes, your labels, your brand on the pack, or plain export packing, whichever your market needs. The packing for your order is agreed with you and confirmed on the order.
Manufactured under the quality management system covered by TGI's ISO 9001:2015 and ISO 13485:2016 certificates. Certificate numbers and the issuer's registry are on the certification page. Open the certificates
Every batch of steel is ordered to a specified grade and arrives with the mill's own certificate, which identifies the mill and states the grade. TGI checks the material at the factory against its own requirement before it goes into production. That check is TGI's own inspection, not an independent laboratory test.
TGI manufactures in its own factory in Sialkot and also supplies articles made by contracted partner workshops, to TGI's specification. Which applies to a given article is confirmed on your order.
One-year guarantee on Premium and Executive tier instruments, hollowware and sterilization containers: any technical manufacturing defect, including material faults and rust, is replaced free of charge. Damage from handling or accidents is not covered. The year runs from the day the goods leave Sialkot.
If something is wrong with a delivery (a manufacturing defect, or a short or wrong article), tell us on WhatsApp within 7 days of delivery, with a video and photographs of what arrived. Replacement instruments are sent free of charge and dispatched within 24 hours of us seeing them; you pay the shipping, and they reach you as a normal order does.
Damage that happened after the goods left Sialkot is a claim against your carrier. The video of your parcel at the shipping office is sent to you before shipment and is the evidence that claim needs.
