Orthopedic instruments
K-Wire / Plate Bender
TGI referenceTG 11-01-0417Quote this to us. It is printed on TGI's own catalog photograph of this article.TGI-C-F71FEED8 Web reference. It identifies this page, not a factory part number.
Sizes TGI publishes13.5cm · 5" Printed on TGI's own catalogue photograph of this article.
Sized and slotted for the thin wire of a K-wire rather than a spinal rod, bending the wire's protruding end over after it has been driven into bone.
In an orthopedic catalog a bender is a hand tool that shapes an implant or a wire to a required curve. It is not one pattern but a family: rod benders, wire and pin benders, K-wire benders and bending presses. The common construction is a hardened steel tool with grooved or slotted working faces that grip the rod or wire at fixed points, and either two long lever handles, a single handle with a socket head, or a screw press. Benders are cataloged by the diameter of rod or wire they take, not only by their own length, which is what separates one listing from the next.
Minimum order300 instrumentsThe minimum for orthopedic instruments. Mixed orders are quoted against your list.
Lead timeInstruments ~2-3 weeks · full sets ~4-6 weeks after advance.
Quality control
The inspection step is set by the line you order.
- Economy line
- sample: visual + dimensional
- Clinical line
- sample + boil test
- Premium line
- tighter sample + hardness test
- Executive line
- 100% inspection + laser mark
Finish A color is a second choice, made on top of the line. Colored finishes on request, on any instrument, in addition to the steel line. Evidenced: black · gold · rose gold · blue · rainbow (anodised titanium).
How it is built
- Working faces are grooved, slotted or notched so the rod or wire seats and does not slip
- Lever form (two handles), single-handle socket form, or a screw-driven bending press
- French pattern rod bender is a scissor-form pair of levers acting on the rod at three points
- No lock and no ratchet: force is applied and released by hand
- Hardened stainless steel; working faces are the hardest part of the tool
- Rated and cataloged by rod or wire diameter capacity in mm
- Rod benders are commonly supplied as a matched pair worked from both sides
PatternsFrench rod bender · One-hand rod bender · K-wire bender · Wire and pin bender · Gratloch wire bender · Bending press · Distal end bender (orthodontic)
The standard sizes this kind of instrument is made in
French rod bender, rods up to 7 mm, 11 3/4 in (29.8 cm) · Wire and pin bender, 6 in (15.2 cm) · Plate bending press, 12 in (30.5 cm) · Gratloch wire bender, wire up to 1.6 mm, 19 cm (7 1/2 in) · K-wire bender, 14 cm (5 1/2 in)
These are the sizes the pattern is manufactured in across the trade. They are not a stock list. Tell us the size you need and we will quote against it.
This describes the bender (rod, wire and pin benders) as an article. 3 other articles in this catalog share it: the sentence above is what separates this one. This describes the article. The steel, the finish and the inspection step are set by the line you order.
Other versions
The same instrument in another figure, finish, size, color or case, each at its own address with its photograph.
Material and quality
| Line | Steel | Origin | Finish | Inspection |
|---|---|---|---|---|
| Economy line | AISI 410 | Pakistani or Taiwanese | satin, passivated | sample: visual + dimensional |
| Clinical line | AISI 420 | Pakistani or German | satin, passivated | sample + boil test |
| Premium line | AISI 420-440C | German or Japanese | fine polish, passivated | tighter sample + hardness test |
| Executive line | AISI 440C | German or Japanese | mirror polish, passivated | 100% inspection + laser mark |
This is the steel each line is made from as standard. A different origin can be supplied on request (a lower grade in Japanese steel, for example), agreed on your order.
Premium is the line where the choice is yours: 420 or 440C, agreed on your order. Economy is always 410 and Executive is always 440C. Those three are the instrument steels. Hollowware and sterilization containers are made in AISI 202 on a Clinical order and AISI 304 on a Premium or Executive one, and they are not offered in the Economy line at all, which is the section above.
True of every order
Instruments are marked to the buyer's requirement (TGI, unmarked, or the buyer's own brand), agreed on the order.
Customized packaging is part of what TGI supplies. Your own printed boxes, your labels, your brand on the pack, or plain export packing, whichever your market needs. The packing for your order is agreed with you and confirmed on the order.
Manufactured under the quality management system covered by TGI's ISO 9001:2015 and ISO 13485:2016 certificates. Certificate numbers and the issuer's registry are on the certification page. Open the certificates
Every batch of steel is ordered to a specified grade and arrives with the mill's own certificate, which identifies the mill and states the grade. TGI checks the material at the factory against its own requirement before it goes into production. That check is TGI's own inspection, not an independent laboratory test.
TGI manufactures in its own factory in Sialkot and also supplies articles made by contracted partner workshops, to TGI's specification. Which applies to a given article is confirmed on your order.
One-year guarantee on Premium and Executive tier instruments, hollowware and sterilization containers: any technical manufacturing defect, including material faults and rust, is replaced free of charge. Damage from handling or accidents is not covered. The year runs from the day the goods leave Sialkot.
If something is wrong with a delivery (a manufacturing defect, or a short or wrong article), tell us on WhatsApp within 7 days of delivery, with a video and photographs of what arrived. Replacement instruments are sent free of charge and dispatched within 24 hours of us seeing them; you pay the shipping, and they reach you as a normal order does.
Damage that happened after the goods left Sialkot is a claim against your carrier. The video of your parcel at the shipping office is sent to you before shipment and is the evidence that claim needs.
