Orthopedic instruments
Hayton William Forceps
TGI referenceTG 11-01-0759Quote this to us. It is printed on TGI's own catalog photograph of this article.TGI-C-C3E9D758 Web reference. It identifies this page, not a factory part number.
Sizes TGI publishes23 cm / 9" Printed on TGI's own catalogue photograph of this article.
Also printed on the photographBroad Tips Printed on TGI's own catalogue photograph of this article.
Also called Maxillary Disimpaction Forceps
A single instrument rather than a matched left-and-right pair, applied inside the mouth to draw the upper jaw forward.
Disimpaction forceps are a heavy, jointed two-handle instrument from the oral and maxillofacial range, cataloged almost always under the Rowe name (also listed as Tessier-Rowe). They are made as a handed pair, a left instrument and a right instrument, and are sold singly or as the pair, which is the feature that most clearly marks them out in a catalog. The working end carries two unequal limbs offset and angled away from the shanks so the two limbs close on opposite faces of the same bony segment, on a screw joint with no ratchet lock. Long shanks and plain bar handles carry the load; the body is forged stainless steel.
Minimum order300 instrumentsThe minimum for orthopedic instruments. Mixed orders are quoted against your list.
Lead timeInstruments ~2-3 weeks · full sets ~4-6 weeks after advance.
Quality control
The inspection step is set by the line you order.
- Economy line
- sample: visual + dimensional
- Clinical line
- sample + boil test
- Premium line
- tighter sample + hardness test
- Executive line
- 100% inspection + laser mark
Finish A color is a second choice, made on top of the line. Colored finishes on request, on any instrument, in addition to the steel line. Evidenced: black · gold · rose gold · blue · rainbow (anodised titanium).
How it is built
- Jointed two-handle forceps on a screw (pin) joint; no ratchet and no box lock
- Made handed, a left instrument and a right instrument, listed and ordered separately
- Working end has two unequal limbs, offset and angled away from the line of the shanks
- Long plain shanks and bar handles rather than finger rings
- Forged stainless steel throughout; some vendors offer a satin/stain finish grip handle
- Made only in a large overall length; not offered in a wide size ladder
PatternsRowe · Rowe maxillary disimpaction forceps · Tessier-Rowe
The standard sizes this kind of instrument is made in
24 cm · 9 3/4 in (24.8 cm)
These are the sizes the pattern is manufactured in across the trade. They are not a stock list. Tell us the size you need and we will quote against it.
This describes the article. The steel, the finish and the inspection step are set by the line you order.
Material and quality
| Line | Steel | Origin | Finish | Inspection |
|---|---|---|---|---|
| Economy line | AISI 410 | Pakistani or Taiwanese | satin, passivated | sample: visual + dimensional |
| Clinical line | AISI 420 | Pakistani or German | satin, passivated | sample + boil test |
| Premium line | AISI 420-440C | German or Japanese | fine polish, passivated | tighter sample + hardness test |
| Executive line | AISI 440C | German or Japanese | mirror polish, passivated | 100% inspection + laser mark |
This is the steel each line is made from as standard. A different origin can be supplied on request (a lower grade in Japanese steel, for example), agreed on your order.
Premium is the line where the choice is yours: 420 or 440C, agreed on your order. Economy is always 410 and Executive is always 440C. Those three are the instrument steels. Hollowware and sterilization containers are made in AISI 202 on a Clinical order and AISI 304 on a Premium or Executive one, and they are not offered in the Economy line at all, which is the section above.
True of every order
Instruments are marked to the buyer's requirement (TGI, unmarked, or the buyer's own brand), agreed on the order.
Customized packaging is part of what TGI supplies. Your own printed boxes, your labels, your brand on the pack, or plain export packing, whichever your market needs. The packing for your order is agreed with you and confirmed on the order.
Manufactured under the quality management system covered by TGI's ISO 9001:2015 and ISO 13485:2016 certificates. Certificate numbers and the issuer's registry are on the certification page. Open the certificates
Every batch of steel is ordered to a specified grade and arrives with the mill's own certificate, which identifies the mill and states the grade. TGI checks the material at the factory against its own requirement before it goes into production. That check is TGI's own inspection, not an independent laboratory test.
TGI manufactures in its own factory in Sialkot and also supplies articles made by contracted partner workshops, to TGI's specification. Which applies to a given article is confirmed on your order.
One-year guarantee on Premium and Executive tier instruments, hollowware and sterilization containers: any technical manufacturing defect, including material faults and rust, is replaced free of charge. Damage from handling or accidents is not covered. The year runs from the day the goods leave Sialkot.
If something is wrong with a delivery (a manufacturing defect, or a short or wrong article), tell us on WhatsApp within 7 days of delivery, with a video and photographs of what arrived. Replacement instruments are sent free of charge and dispatched within 24 hours of us seeing them; you pay the shipping, and they reach you as a normal order does.
Damage that happened after the goods left Sialkot is a claim against your carrier. The video of your parcel at the shipping office is sent to you before shipment and is the evidence that claim needs.
