Electrosurgical instruments
Conization Electrode
Web referenceTGI-C-93550563Quote this to us. It identifies this page, not a factory part number.
Also printed on the photographDisposable Printed on TGI's own catalogue photograph of this article.
A reusable electrode meant to be cleaned, sterilized and used again, as distinct from the single-use disposable pattern in this family.
A conization electrode is an electrosurgical accessory built for cervical conization, cutting a cone-shaped tissue specimen from the cervix with an electrosurgical current instead of a scalpel. The working part is a thin length of conductive wire bent into a loop, square or straight form, fixed to an insulated shaft that plugs into a reusable electrosurgical handle, so that only the wire itself carries the cutting current. It is distinguished from the smaller loop electrodes used for shallow surface-lesion removal (standard LEEP loops) by cutting a deeper, fuller cone of tissue.
Minimum order300 instrumentsThe minimum for electrosurgical instruments. Mixed orders are quoted against your list.
Lead timeInstruments ~2-3 weeks · full sets ~4-6 weeks after advance.
Quality control
The inspection step is set by the line you order.
- Economy line
- sample: visual + dimensional
- Clinical line
- sample + boil test
- Premium line
- tighter sample + hardness test
- Executive line
- 100% inspection + laser mark
Finish A color is a second choice, made on top of the line. Colored finishes on request, on any instrument, in addition to the steel line. Evidenced: black · gold · rose gold · blue · rainbow (anodised titanium).
How it is built
- Thin conductive wire (loop, square, or straight form) as the active cutting element
- Insulated shaft isolates the handle grip from the electrically active wire
- Push-fit or bayonet base connects to a reusable electrosurgical generator handle
- Made in reusable (autoclavable) and single-use versions
- Wire gauge varies by fineness: finer wire is associated with better-quality histology specimens
- Cuts a deeper cone than a standard surface LEEP loop
PatternsLoop electrode · Square electrode · Straight/needle electrode
The standard sizes this kind of instrument is made in
10 mm x 5 mm, small loop · 10 mm x 10 mm, small loop, deep · 15 mm x 8 mm, medium loop · 20 mm x 12 mm, large loop · 20 mm x 15 mm, large loop, deep · 25 mm x 10 mm, extra-large loop
These are the sizes the pattern is manufactured in across the trade. They are not a stock list. Tell us the size you need and we will quote against it.
This describes the article. The steel, the finish and the inspection step are set by the line you order.
Material and quality
| Line | Steel | Origin | Finish | Inspection |
|---|---|---|---|---|
| Economy line | AISI 410 | Pakistani or Taiwanese | satin, passivated | sample: visual + dimensional |
| Clinical line | AISI 420 | Pakistani or German | satin, passivated | sample + boil test |
| Premium line | AISI 420-440C | German or Japanese | fine polish, passivated | tighter sample + hardness test |
| Executive line | AISI 440C | German or Japanese | mirror polish, passivated | 100% inspection + laser mark |
This is the steel each line is made from as standard. A different origin can be supplied on request (a lower grade in Japanese steel, for example), agreed on your order.
Premium is the line where the choice is yours: 420 or 440C, agreed on your order. Economy is always 410 and Executive is always 440C. Those three are the instrument steels. Hollowware and sterilization containers are made in AISI 202 on a Clinical order and AISI 304 on a Premium or Executive one, and they are not offered in the Economy line at all, which is the section above.
True of every order
Instruments are marked to the buyer's requirement (TGI, unmarked, or the buyer's own brand), agreed on the order.
Customized packaging is part of what TGI supplies. Your own printed boxes, your labels, your brand on the pack, or plain export packing, whichever your market needs. The packing for your order is agreed with you and confirmed on the order.
Manufactured under the quality management system covered by TGI's ISO 9001:2015 and ISO 13485:2016 certificates. Certificate numbers and the issuer's registry are on the certification page. Open the certificates
Every batch of steel is ordered to a specified grade and arrives with the mill's own certificate, which identifies the mill and states the grade. TGI checks the material at the factory against its own requirement before it goes into production. That check is TGI's own inspection, not an independent laboratory test.
TGI manufactures in its own factory in Sialkot and also supplies articles made by contracted partner workshops, to TGI's specification. Which applies to a given article is confirmed on your order.
One-year guarantee on Premium and Executive tier instruments, hollowware and sterilization containers: any technical manufacturing defect, including material faults and rust, is replaced free of charge. Damage from handling or accidents is not covered. The year runs from the day the goods leave Sialkot.
If something is wrong with a delivery (a manufacturing defect, or a short or wrong article), tell us on WhatsApp within 7 days of delivery, with a video and photographs of what arrived. Replacement instruments are sent free of charge and dispatched within 24 hours of us seeing them; you pay the shipping, and they reach you as a normal order does.
Damage that happened after the goods left Sialkot is a claim against your carrier. The video of your parcel at the shipping office is sent to you before shipment and is the evidence that claim needs.
