Dental instruments
4Pcs Periodontal File Set (Gold Coated)
TGI referenceTG-REF:1009Quote this to us. It is printed on TGI's own catalog photograph of this article.TGI-C-B2FCBEE6 Web reference. It identifies this page, not a factory part number.
A straight, single-bevel blade set on an offset shank, for planing a flat bone or tooth surface rather than splitting a ridge or hooking around a tooth.
A chisel set is a graduated group of chisels supplied as one article. In implant and oral surgery it is a set of bone chisels, usually with osteotomes and often a mallet, in a sterilization case with a rack; in periodontal work it is a set of fine, flat-bladed hand chisels graded by blade width, sometimes packed with Ochsenbein chisels and periodontal scalers in one kit. The distinction the set is built around is the grind: a chisel is beveled on one face only, so the flat back guides the cut, while an osteotome is beveled on both faces (or ground to a rounded, concave tip for ridge expansion) and cuts or spreads bone along its own center line. Each blade is one-piece forged stainless steel with no joint, on either a plain octagonal or round knurled handle, or, on osteotomes made for ridge expansion and sinus lift work, a handle ending in a grooved connector that takes a surgical mallet or a ratchet driver. The set is defined by its list of blade widths or tip diameters in millimeters, which the trade grades and often color-codes piece to piece; overall length is fixed per pattern.
Minimum order200 instrumentsThe minimum for dental instruments. Mixed orders are quoted against your list.
Lead timeInstruments ~2-3 weeks · full sets ~4-6 weeks after advance.
Quality control
The inspection step is set by the line you order.
- Economy line
- sample: visual + dimensional
- Clinical line
- sample + boil test
- Premium line
- tighter sample + hardness test
- Executive line
- 100% inspection + laser mark
Finish A color is a second choice, made on top of the line. Colored finishes on request, on any instrument, in addition to the steel line. Evidenced: black · gold · rose gold · blue · rainbow (anodised titanium).
How it is built
- One-piece forged stainless steel blade and handle; no joint
- Chisel beveled on one face; osteotome beveled on both faces or ground to a rounded, concave tip, cataloged as separate articles
- Handles made octagonal (will not roll) or round knurled; ridge-expansion and sinus-lift osteotomes add a grooved connector for a mallet or ratchet driver
- Blades made straight and curved (or offset) in the same pattern
- Blade width or tip diameter in millimeters is the sizing dimension, often paired with a color code per size; overall length fixed per pattern
- Supplied in a case with a rack, frequently with a mallet
PatternsBone splitting chisel (straight or curved, flat single-bevel blade) · Ochsenbein chisel (numbered patterns, bi-beveled, notched blade for periodontal recontouring) · Ridge-expansion / sinus-lift osteotome (concave or convex tip, color-coded by diameter, mallet or ratchet connector)
The standard sizes this kind of instrument is made in
4 mm, 4.5 mm, 7 mm and 7.5 mm blade width (straight or curved bone splitting chisel) · 2.8 mm, 3.3 mm, 3.8 mm and 4.3 mm tip diameter (concave-tip osteotome, ridge expansion and sinus lift progression)
These are the sizes the pattern is manufactured in across the trade. They are not a stock list. Tell us the size you need and we will quote against it.
This describes the chisel set (bone chisels and osteotomes) as an article. 8 other articles in this catalog share it: the sentence above is what separates this one. This describes the article. The steel, the finish and the inspection step are set by the line you order.
Other versions
The same instrument in another figure, finish, size, color or case, each at its own address with its photograph.
Material and quality
| Line | Steel | Origin | Finish | Inspection |
|---|---|---|---|---|
| Economy line | AISI 410 | Pakistani or Taiwanese | satin, passivated | sample: visual + dimensional |
| Clinical line | AISI 420 | Pakistani or German | satin, passivated | sample + boil test |
| Premium line | AISI 420-440C | German or Japanese | fine polish, passivated | tighter sample + hardness test |
| Executive line | AISI 440C | German or Japanese | mirror polish, passivated | 100% inspection + laser mark |
This is the steel each line is made from as standard. A different origin can be supplied on request (a lower grade in Japanese steel, for example), agreed on your order.
Premium is the line where the choice is yours: 420 or 440C, agreed on your order. Economy is always 410 and Executive is always 440C. Those three are the instrument steels. Hollowware and sterilization containers are made in AISI 202 on a Clinical order and AISI 304 on a Premium or Executive one, and they are not offered in the Economy line at all, which is the section above.
True of every order
Instruments are marked to the buyer's requirement (TGI, unmarked, or the buyer's own brand), agreed on the order.
Customized packaging is part of what TGI supplies. Your own printed boxes, your labels, your brand on the pack, or plain export packing, whichever your market needs. The packing for your order is agreed with you and confirmed on the order.
Manufactured under the quality management system covered by TGI's ISO 9001:2015 and ISO 13485:2016 certificates. Certificate numbers and the issuer's registry are on the certification page. Open the certificates
Every batch of steel is ordered to a specified grade and arrives with the mill's own certificate, which identifies the mill and states the grade. TGI checks the material at the factory against its own requirement before it goes into production. That check is TGI's own inspection, not an independent laboratory test.
TGI manufactures in its own factory in Sialkot and also supplies articles made by contracted partner workshops, to TGI's specification. Which applies to a given article is confirmed on your order.
One-year guarantee on Premium and Executive tier instruments, hollowware and sterilization containers: any technical manufacturing defect, including material faults and rust, is replaced free of charge. Damage from handling or accidents is not covered. The year runs from the day the goods leave Sialkot.
If something is wrong with a delivery (a manufacturing defect, or a short or wrong article), tell us on WhatsApp within 7 days of delivery, with a video and photographs of what arrived. Replacement instruments are sent free of charge and dispatched within 24 hours of us seeing them; you pay the shipping, and they reach you as a normal order does.
Damage that happened after the goods left Sialkot is a claim against your carrier. The video of your parcel at the shipping office is sent to you before shipment and is the evidence that claim needs.
